|
Equipment today must specialize on one thing in order to bring outstanding results.
Studies show that 67.5% of converting rolls is changing its size to a new one. A RollRazor was designed solely
for just that!
• 4 rolls vs. 1 = 300% more production per hour
• Get the production of 2.7 slitter/rewinders in one machine
• You can make two press-ready rolls in 3 minutes
• One person = speed? If you have the right equipment it can!
• More production means lower cost per converted ton- 72.2% lower cost
• $9 operating cost per ton
• Labor cost per ton are $2.27
• Never purchase cores with this system
• Electricity costs are only 54¢ per short ton
• Having the ability to cut any grade regardless of basis weight
• Don't limit your plant with roll size
• Compete turn-key package (only power needed)
• You can convert Wet/Damaged rolls
• Web-based roll tracking for up-to-the-minute production over the net
• Combining a RollRazor with a rewinder for the best of both worlds!
• Manufacturer's Original mill wind - Guarantied!
• Original sheet orientation & web tension - Guarantied!
• Breaks per 100 rolls = .005% (industry standard 3.0%)
• Consistency between operators
• Better printability & runability
|